INGOS Ltd. COR400 17.7.2019
Strana 2
1.
INTRODUCTION
The Chiller is designed to cool the cooler rotary vacuum evaporator (it can also be used for
two rotary evaporators together). The chiller can be used for other device which need cooling. The
control module controls temperature in the cooling tanks. The chiller is designed as a single
functional instrument.
4
3
5
7
6
2
8
1
1.
Switch
4. Output cooling medium
7. Grip
2. Thermostat
5. Input cooling medium
8. Socket or switch
3. Circulation pump
6. Overflow circulation pump
Fig.1 Chiller
Warning :
Using devices other than as described in the instructions can cause security breaches!
2.
DESCRIPTION AND SPECIFICATION
2.1 Description
The instrument consists of a box in which is thermostatic tank, as a source of cold a modern
compressor cooling unit Lindr is used that uses the input electric energy for direct transfer to
chilling. Cooling loop in a thermostated tank is made of stainless steel. Cooled thermostated tank is
equipped with a circulation pump. Temperature control and cooler run is through digital thermostat.
Used materials meet the highest requirements for hygiene standards and guarantee a long
working life of this cooler.
Two grips located on the sides of the cooler facilitate handling.
