INGOS Ltd. COR400 17.7.2019
Strana 7
6.
WARRANTY, OPERATING CONDITIONS
For the instrument the manufacturer provides a warranty of two years from the delivery to the
customer. The instrument may be used only in the manner described in this manual. The producer is
not liable for damages resulting for failure to comply with the conditions set in this manual.
The instrument is designed for an ambient temperature 15 - 35 °C; with humidity up to 80%
without acid and caustic vapors. The inlet cord plugs into a socket circuit featuring protection 16 A.
All warranty and post warranty repairs are to be performed by the manufacturer, or its
authorized body.
Warning!
For using water as coolant, set in mode F2 lower limit of the temperature at 1°C and above.
7.
WASTE DISPOSAL
At the end of life discard the instrument according to valid regulations on waste or return to
the vendor or producer for liquidation.
The instrument contains a cooling gas R 290.
The instrument is destroyed as electronic waste.
8.
CONTENT
1.
INTRODUCTION ...................................................................................................................... 2
2.
DESCRIPTION AND SPECIFICATION .................................................................................. 2
2.1
Description .............................................................................................................................. 2
2.2
Specification ............................................................................................................................ 3
3.
COMMISSIONING .................................................................................................................... 3
3.1
Unpacking ............................................................................................................................... 3
3.1.1
What you will need .......................................................................................................... 3
3.1.2
Connecting elements, instrument assembly ..................................................................... 4
3.2
Temperature controller ............................................................................................................ 4
3.3
Switching on the instrument .................................................................................................... 5
4.
ROUTINE MAINTENANCE AND SERVICE ......................................................................... 6
5.
ACCESSORIES .......................................................................................................................... 6
6.
WARRANTY, OPERATING CONDITIONS ........................................................................... 7
7.
WASTE DISPOSAL ................................................................................................................... 7
8.
CONTENT .................................................................................................................................. 7
