Configuration and Management
13
2.
If the NetBEUI protocol is not listed click the
Add
button to
open the Select Network Component Type window:
3.
Select the Protocol network component and then click
Add
.
The following window opens:
4.
Under
Manufacturers:
select Microsoft. Under
Network
Protocols:
select NetBEUI. Insert your Windows 95/98
CD-ROM into the CD-ROM drive if necessary, and click
OK
.
5.
Windows will copy files to your hard disk drive and install
the NetBEUI protocol.
Now you can configure the IP address for the FISC CDM.
1.
Connect your FISC CDM to a Microsoft network where the
NetBEUI protocol is activated and turn on the power.
2.
Select a PC (running Windows 95/98 or Windows NT) that
is physically connected to the same network segment as the
FISC CDM.
3.
Please go to “Network Neighborhood” of this PC and
browse the network by double clicking "Entire Network".
You will find a new workgroup in the name "Workgroup".
Please browse this workgroup and you will find FISC CDM
in the name of “SMBxxxxxxxx” where xxxxxxxx are the
last 8 digits of FISC CDM’s MAC (Media Access Control)
address.
