68
C.
Motion
：
(Figure 5-25).
Motion Enable
：
To check it to enable the motion detection function.
Local (Software) or IP camera’s Motion Detection
：
You may select the motion
detection event source from Camera or SmartVIEW to operate that.
Event Interval Time
：
If several events occurred within
Event Interval Time
, all
of the events will be treated as a single event. This default value is 10 seconds
and can be set between 0
～
3600 seconds.
Sensitive
：
This setting defines the sensitivity of the motion detection. This
default value is 80 and the value can be set between 1
～
100. The higher value
means the higher sensitivity.
Add Action Zone
：
Click this button to create a zone for motion detection.
Select Whole Zone
：
Click this button to set the whole area on the video
become detection zone.
Delete Action Zone
：
Click this button to specify a zone which is disabled for
motion detection.
Delete All Zone
：
Click this button to disable all motion detection zones in the
picture.
Motion detection schedule
：
To set when to enable/disable the motion
detection according to weekday/hours or calendar date. (Refer to Figure 5-26)
Notice
：
One channel can only have one detection zone; therefore no matter
how many zones are drawn in a channel, they will all be regarded as one
irregular-shaped zone.
Figure 5-25
Summary of Contents for iSC-NVR2316-T
