15
4. Install your hard disk to the drive tray. Gently put the hard disk into drive tray with its la-
bel side facing up and the connector side facing the inside of the chassis. Secure the
hard drive by fastening 4 screws from both sides.
5. Install drive tray by pushing it into drive bay. when it is almost fully inserted, close the
bezel. The bezel will secure the back-end connection to the backplane.
1
2
HDD
Bezel Lever
Avoid touching the hard drive's circuit board or connector pins. Doing so can damage the
hard drive by electro-static discharge.
IMPORTANT: