26 / 92
Kiwi Syslog Daemon is free log server software for Windows, which can receive, record and display
logs from host (such as gateway, exchange board and Unix host). After downloading and installing
Kiwi Syslog Daemon, it mus be configured through the menus “
File >> Setup >> Input >> UDP
.”
From the navigation panel, select
System >> System Log
, then enter “
System Log
” page, as shown
below.
Page description is shown below:
Parameters
Description
Default
Log to Remote System
Enable remote log server
Disable
IP address/Port (UDP)
Set the IP and Port of remote log server
N/A/Port:
514
Log to Console
Print the log to console.
Disable
3.2.6 Config Management
Users may import an old configuration or backup the current configuration.
From the navigation panel, select
System >> Config Management
, then enter the “
Config
Management
” page, as shown below.
