56 / 92
Page description is shown below:
Parameters
Description
Default
Enable
Check to enable filtering.
Enable
Protocol
The available options are:
TCP, UDP, ICMP, and all.
All
Source IP address
Set the source IP address.
0.0.0.0/0
Source Port
Set the source port.
N/A
Destination IP
Set the destination IP address. N/A
Destination Port
Set the destination port.
N/A
Action
Select either accept or block.
Accept
Log
log can print the access IP
address
Disable
Description
Describe your configuration.
N/A
3.5.3 Port Mapping
The IG601 support Network Address and Port Translation. It allows remote computers (for example,
computers on the Internet) to connect to the local device that linked to LAN interface.
To configure port mapping, go into the navigation panel, select
Firewall >> Port Mapping,
then enter
“
Port Mapping
” page, as shown below.
