2. Description remote control keys Air2
2. Description remote control keys Air2
The remote-control key Air2 has 4 buttons which can be programmed from the control panel.
Each button can be associated with a control panel shortcut, which can be activated by pressing the button
and is confirmed by a beep from the remote-control buzzer.
Furthermore, if the “super keys” function is enabled, by pressing and holding the button for at least 2
seconds, until a second beep is heard, you can activate a shortcut different from the one associated with
simply pressing the key.
In this way you can have up to 8 different shortcuts on each remote-control key.
3PMMJOHDPEFBVUIFOUJDBUJPO
Remote control wireless transmission Air2 is guaranteed by the use of a rolling-code algorithm. This allows
the module Air2-BS200 to authenticate the validity of each transmission from remote-control keys.
If the result of the rolling code is negative, the red confirmation LED (800ms) lights up for a long period.
To reset the transmissions and rolling code it is necessary to press and hold keys “
F3
” and “
F4
” sim-
ultaneously.
The function is active at default but can be disabled during the programming phase. Deactivation can be
useful to the installer when the same wireless command device is used on several systems.
2.1 Description of parts
<">LJ
Key1 / F1, LED1 red
<#>LJ
Key2 / F2, LED2 red
<$>LJ
Key3 / F3, LED3 red
<%>LJ
Key4 / F4, LED4 red
<&>LJ
Confirmation LED red/green
4
Installation and programming manual- 100-DRAFT
