KF100, Pebble, Ergo | © 2020 Inim Electronics S.r.l.
5
2.2 Technical specifications of remote-control keysAir2
2.2 Technical specifications of remote-control key-
sAir2
Model
Air2-KF100
Air2-Pebble
Air2-Ergo
Battery
Lithium CR2032 3V
“Low battery” fault voltage
< 2,12V
Current draw
during standby
350 nA
maximum
36 mA
Buzzer
Multitone
Operating environmental conditions
Temperature
from -10 to +40 °C
Relative humidity
≤
93% without condensation
Security rating
2
Environmental class
II
Dimensions (W x H x D)
61 x 41 x 12mm
69 x 42 x 15 mm
72 x 41 x 16mm
Weight
17 g
21 g
25 g
Rubber button cover
2 models:
with icons
with number but-
tons
1 model (with icons and numbered buttons)
Number of available PIN code combinations
2
24
2.3 Remote-control key notificationsAir2
Each model of remote-control keyAir2is capable of notifying the user, via the operation confirmation LEDs
and buzzer, of the successful outcome of requested operationsAir2-BS200.
Push button
LED 1
LED 2
LED 3
LED 4
Buzzer signal
Operation
F1
1 flash
beep
Activates shortcut 1
F2
1 flash
beep
Activates shortcut 2
F3
1 flash
beep
Activates shortcut 3
F4
1 flash
beep
Activates shortcut 4
F2 + F3
1 flash
1 flash
beep
Block/Unblock remote-control device
F3 + F4
1 flash
1 flash
beep
Enrolling
Any
3 flashes
3 flashes
Remote-control key locked signal
Panel response
Confirmation LED
Buzzer signal
Command not received
1 red blink
Operation not done
3 red blinks
bop
Operation done
3 red blinks
long beep
-PXCBUUFSZ
The low battery signal is shown on the operation confirmation LED in yellow (green and red LED sim-
ultaneously).
