2. Air2-FD100 description
2. Air2-FD100 description
Air2-FD100 is capable of sensing the presence of smoke particles and thus detecting a fire in its early
stages.
Air2-FD100 is an optical smoke detector equipped with a sampling chamber based on light scattering mass
(Tyndall effect); in order to ensure the proper operating efficiency of the device, it must be installed away
from drafts and large objects which may alter the airflow to the sampling chamber.
"UUFOUJPO
Air2-FD100 is a smoke detector that can be used exclusively for the detection of
smoke in the protected area.
With the use of Air2-FD100 the intrusion control system INIM cannot be considered a
fire detection system.
The operating parameters of detectors can be changed and adapted to the environmental conditions, either
from the control panel or via the programming software.
The detector signals alarm status when the level of smoke in the protected environment reaches the fol-
lowing levels:
0.08 dB/m (pre-set mode)
0.10 dB/m
0.12 dB/m
0.15 dB/m
4
Installation and programming manual- 100-DRAFT
