Installation and Programming manual
Introduction
5
Chapter 1
Introduction
Note:
The power supply stations described in this manual have been designed and developed to the highest
standards of quality, reliability and performance. All product components are capable to application
requirements and able to operate in compliance with the related technical specifications when the
temperature external to their enclosures complies with Category 3k5 of EN60721-3-3:1995.
1.1
Application and use
The SmartLevel unit is a constituent part of your fire detection system and is capable of supplying power to
the remote loads of the system. It supplies power to remote loads such as: fire-door magnets, sounders,
emergency signs, linear smoke detectors.
Note:
The SmartLevel power supply station is EN54-4 compliant and specifically EN 54-4:1997 A2 which
includes a test regarding the internal resistance of the batteries.
Main features:
• User interface comprising display, buttons and buzzer
• 3 controlled outputs
• Fault relay
• Direct connection to RS485 BUS
The SmartLevel can operate in stand-alone mode using the fault signaling output and on-board data, or
combined mode using the RS485 BUS of an INIM Electronics fire detection system (refer to
Chapter 4 -
Functions and features
).
Figure 1 - Example of a typical application
Remote control via the RS485 BUS
3 output channels
Maximum power output 0.8A for SPS24040 and 3A for SPS24140
of an INIM fire-detection panel
