8
General information
Installation and Programming manual
2.7
Recommendations
INIM Electronics recommends that the apparatus be tested on a regular basis (refer to paragraph
2.8
Testing the apparatus
).
2.8
Testing the apparatus
This apparatus has been designed to the highest standards of quality and performance. However, it may
fail to function as intended due to the failure of a component. Most problems that prevent the apparatus
from operating as intended can be found by regular testing and maintenance (refer to
Appendix A
Maintenance
).
2.9
Note to the installer
In order to provide adequate protection and instructions for proper use, you (the installer) should
be familiar with the operating procedure of this device. As the only individual in contact with system users,
it is your responsibility to instruct them on how to use this device properly.
2.10
Technical support
Our professional engineers are readily available to assist you. Call us, and you will be connected right away
to a person who will answer all your questions and provide you with full technical support.
2.11
Conventions
2.11.1 Terminology
Power supply unit:
refers to the device defined in paragraph
2.13 Device labels
.
Left, right, behind, above, below:
refer to the directions as seen by the operator in front of the mounted
device.
Qualified personnel
: those persons whose training, expertise and knowledge of the laws and bylaws
regarding service conditions and the prevention of accidents, are able to identify and avoid all possible
situations of danger.
Press:
click on a video button, or press a key on the panel keypad.
2.11.2 Graphic conventions
Following are the graphic conventions used in the text. For a description of the graphic conventions relating
to the interface, refer to
Chapter 6 - The Frontplate
.
Note:
The detached notes contain important information regarding the subject in the respective text.
Attention:
The attention prompts indicate that total or partial disregard of the procedure could damage
the connected devices.
Danger:
The danger warnings indicate that total or partial disregard of the procedure could injure the
operator or persons in the vicinity.
Conventions
Example
Description
Text in Italics
See
paragraph 5.1
Internal
components
.
Text in italics: indicates the title of a chapter, section, paragraph,
table or figure in this manual or other published reference.
[Uppercase letter]
[A]
Represent the device parts or video objects.
BUTTON
Ok, Esc
Computer or user interface keys.
