32
initio
®
2
If you are installing Windows NT from a CD version, locate the Windows NT Setup
Disk for CD-ROM Installation. Make a backup copy of this diskette before installa-
tion.
3
Insert the backup Windows NT Setup disk into drive A: and turn on your computer.
4
Follow the instructions on the screen until you come to a window titled:
WINDOWS NT WORKSTATION SETUP
(for servers, it will read
WINDOWS NT SERVER
SETUP
)
.
Press
ENTER
to continue setting up Windows NT.
Select
S
to skip mass storage detection.
Select
S
to configure additional SCSI adapters.
5
When prompted by the Windows NT installation, scroll down the list and select
OTHER (Requires disk provided by a hardware manufacturer)
from the
list of Additional SCSI Adapters. A message will appear on screen stating to:
Remove diskette in drive A and set it aside.
Insert
INI-9XXXU/9XXXUW DRIVER DISK 1
and press
<ENTER>
.
Select:
Initio INI-9XXX SCSI Host Adapter and press
<ENTER>
.
6
The Initio host adapter driver is now installed The on-screen instructions will
continue for a complete installation of Windows NT. Refer to your Windows NT
users manual for completion of the operating system installation procedure.
Adding or updating the Initio driver to an existing Windows
NT system:
For computer systems using other SCSI host adapters or an IDE drive to provide the
system boot routine, these instructions will guide you through the INI-9XXX host
adapter driver installation. The Windows NT driver will be found on the
INI-9XXXU/
9XXXUW DRIVER DISK 1
. It is important that the SCSI bus hardware and Windows NT are
installed and configured before proceeding further.
1
Once a Windows NT session is established, use your installed mouse or the appropriate
key strokes to select
MY COMPUTER
from the Main Desktop. Execute the following
steps:
Select
CONTROL PANEL
from within the MY COMPUTER group.
Select
SCSI ADAPTERS
from within the CONTROL PANEL group.
2
Select the
DRIVERS
tab from within the SCSI ADAPTERS group.
In the DRIVERS window, select
ADD
3
In the INSTALL DRIVER window, select
HAVE DISK...
.
Microsoft Windows NT Driver Installation
Summary of Contents for INI-9090U
