background image

59

initio

®

Initio Corporation warrants to the original purchaser that this product shall be free from defects in
material and workmanship for a period of 5 years from the date of purchase. Should this product, in
the judgment of Initio Corporation, prove to be defective, Initio Corporation will at its option repair or
replace the product once it has been returned to Initio Corporation free of charge. Any replaced parts
or products become the property of Initio Corporation. You may obtain warranty service by first
getting authorization from Initio Corporation then returning this product with proof of delivery date,
shipping charges prepaid, to Initio Corporation. This warranty does not apply to the software compo-
nent of the product nor to any product which has been subjected to misuse, accident, abuse or use in a
manner inconsistent with normal host adapter operations. The original purchaser must be registered
with Initio Corporation (by mailing the Product Registration Card) to qualify for warranty coverage.
This remedy is your exclusive remedy for breach of this warranty.

INITIO DISCLAIMS ALL OTHER WARRANTIES EITHER EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. INITIO SHALL BE LIMITED TO THE WARRANTY PERIOD

SPECIFIED ABOVE. ALL OTHER WARRANTIES ARE EXCLUDED. INITIO’S TOTAL LIABILITY HEREUNDER SHALL NOT

EXCEED THE PRICE PAID FOR THE PRODUCT PURCHASED. IN NO EVENT SHALL INITIO BE LIABLE FOR ANY INDI-

RECT, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFOR-

MANCE OF THE PRODUCT, EVEN IF INITIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operations.

Class B Equipment

Information to User

This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-

tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions contained in this manual, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that of the receiver.

Consult the dealer or a experienced audio television technician.

Note:

 Connecting this device to peripheral devices that do not comply with CLASS B requirements or using an unshielded

peripheral data cable could also result in harmful interference to radio or television reception.

Product Warranty

Summary of Contents for INI-9090U

































































Reviews: