Promi SD™ User Manual ver 1.7
www.initium.co.kr
20
3-4.
Now jobs for
SD02
are finished. Detach
SD02
from your computer.
3-5.
Attach
SD01
to your computer.
3-6.
Restart Promi-WIN™.
3-7.
Select Device Setting icon in the list control box, and select
MODE2
in Operation
Mode and apply.
3-8. Now,
detach
SD01
from your computer.
3-9. Make sure that power to Both
SD01
and
SD02
are supplied.
With two of the
SD01
and
SD02
, turn off both using Switch on the side of its body.
Then, turn on again Both
SD01
and
SD02
almost at the same time.
Now, you will see Green Status LEDs on both units.
SD01
and
SD02
will be connected automatically, whenever, if configuration is not
changed.