ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 6.
1) Securely tighten all bolts by Allen wrench (g), but do not over tighten. Lay the lounge chair back on the floor,
then attach the seat metal frame (B) to seat cushion (F) using 1
3
16
" bolts (b) as shown below. Securely tighten all
bolts by Allen wrench (g) .
2) Attach the upholstery arm rests (G) to the left/right side metal frame (C/D) using 1
1
2
" bolts (c). Securely tighten
by Allen wrench (g).
Step 5. Hold the assembled seat cushion and back cushion by two or more adults is recommended.
Lock the back of back cushion (E) on the back metal frame (A) using 1
3
16
" bolts (b), lock washers (e) and flat
washers (
h
). Loosely tighten all the bolts by Allen wrench (g).
h
