7. Click “Finish” to save your laser setup.
If your laser is connected to the computer, LightBurn will try to establish communication. For some
systems this will
home
the laser, for others it will simply show “Ready” in the status box at the top of the
laser tab, or the bottom status bar, depending on your system.
If you are adding multiple devices, repeat the steps above for each Mako Laser Cutter. When you are
done, you can set the default connection by clicking on the name in the device list and clicking the
“Make Default” button.
You may also edit or remove devices by clicking the device and choosing the appropriate button.
4.0 OPERATION
6. Choose the X0,Y0 origin point that matches your machine.
All machines have the orgin point X0,Y0.
26
