3
SAFETY INSTRUCTIONS
Always wear proper apparel. Do not
wear any loose clothing, gloves, neckties
or jewelry that can get caught in the
machine’s moving parts. Secure long hair
with a rubber band or hair tie.
Keep work area well lit and clean.
Make sure your work area is not cluttered.
Do not operate unattended. Adult
supervision is required at all times. Never
leave the machine running unattended.
Do not operate this machine while
under the influence of drugs, alcohol
or any medication.
Never run diamond grinder bits dry.
Diamond grinder bits are designed to
be used with a lubricant, such as water,
and will be ruined immediately if used
dry. Always make sure you are using
adequate water while grinding so that
the material’s dust doesn’t form. This
dust contains chemicals that can be
hazardous to your lungs if inhaled and is
known to cause cancer, birth defects or
other reproductive harm. To reduce your
exposure to these chemicals, work in a
well ventilated area and wear a face or
dust mask.
Never grind more than one workpiece
at a time.
Some materials contain poisonous
elements. Avoid grinding materials that
contain uranium, mercury, lead, arsenic,
etc. Make sure you know the material you
are grinding.
Do not allow water to run down the
shaft and into the motor. This will cause
the motor to instantly burn out. This
machine is designed in such a way that
this does not occur with normal use.
Do not overfill the water reservoir.
Overfilling can create electrical shock
and damage the motor.
Do not force the tool or attachment to
do a job it is not designed to do.
Avoid awkward operations and hand
positions. Make sure you have good
balance while working on this machine.
A sudden slip could cause your hand to
move into the moving grinder bit.
Always stay alert. You must be focused
while working on this machine. Your
grinding material can catch on the
grinder bit and eject out of the area.
Maintenance
Always disconnect from power
before servicing. Disconnect machine
from power source before making any
adjustments and when not in use.
Do not abuse the power cord. Never
carry the machine by the cord or yank it
to disconnect from receptacle. Keep cord
away from heat, oil and sharp edges.
Do not open the motor housing. There
are no user serviceable parts inside.
Clean and dry machine after use.
