26
limit, then the IsatPhone 2 may cease charging
until the temperature is reduced.
Placing Voice Calls
Bluetooth
®
calls via IsatPhone 2
The IsatDock2 MARINE allows for Bluetooth
audio calls to be placed via the IsatPhone 2
handset while docked. Consult the IsatPhone 2
manual for further information on pairing and
Bluetooth discovery setup.
Speakerphone Phone Call Use
Mobile Originating
1.
By default the Oceana 800 will start all
calls in speakerphone mode when dialing
on the keypad if RJ11 and privacy handset
remain on hook.
2.
Dial using the full Inmarsat dialing sequence
eg. 00 country code and telephone number
on the IsatPhone 2 handset keypad whilst
docked. Press the GREEN key on the
IsatPhone 2 to start the connection.
3.
A message will display on the IsatPhone 2
handset to indicate the call is progressing.
4.
Once the call is connected, the STATUS LED
will flash to indicate a call is in progress.
5.
To terminate the call, press the RED key
on the IsatPhone 2 handset or press the
speakerphone button.
3.
A message will display on the IsatPhone 2
handset indicating the number called and
that the call is progressing.
4.
Once the call is connected, the STATUS LED
will flash to indicate a call is in progress.
5.
Place the RJ11/POTS phone handset “ON
HOOK” to terminate the call.
Mobile Terminating
1.
The RJ11/POTS phone will sound its ringer.
2.
Lift the RJ11/POTS phone handset
“OFFHOOK” to answer the call.
NOTE (default operation)
For mobile terminated calls, the call will remain
active for ~90 seconds even if the RJ11/POTS
phone is placed ON HOOK. To end the call
immediately, the other calling party must hang
up (ON HOOK) the call.
Data use
Ensure that you have installed the BEAM USB
driver – see section “USB Driver Installation”
(shown on page 28).
The IsatDock2 MARINE allows for circuit
Options:
A.
During a call, you may use the optional privacy
handset by taking the privacy handset out of
its cup. This automatically directs the call audio
to the privacy handset.
B.
To return the call back to “speakerphone”
mode, press the speakerphone button and
return the privacy handset to its cup.
Mobile Terminating
1.
Answer the incoming call by pressing the
speakerphone button or the GREEN key on
the IsatPhone 2 handset.
2.
Once the call is in progress, the same options
are available as described in “Speakerphone
Phone Call – Mobile Originating”
3.
Press the RED key on the IsatPhone 2
handset or press the speakerphone button
to terminate the call.
RJ11/POTS phone use
Mobile Originating
1.
Lift the RJ11/POTS phone handset
“OFFHOOK” and listen for the dial tone. The
mute LED will flash yellow to indicate the
RJ11/POTS is in use.
2.
Dial using the full Inmarsat dialing sequence
eg. 00 country code and telephone number on
the RJ11 telephone keypad.
Summary of Contents for IsatDock2 MARINE
Page 1: ...IsatDock2 MARINE User Manual Inmarsat Approved ...
Page 2: ...2 ...
