GENERAL OPERATION
Turn on the main power switch of the equipment (Crane).
Install 2 AA batteries in the battery box in the Transmitter
. Make sure the “+” and
“
-
“ directions are correct.
Attach Transmitter battery door with screws.
Insert security key in the “OFF” position.
Turn the keyswitch clockwise t
o the “ON” position, then continue to turn it to the
“START” position to power
-on.
Note:
LED indicator will flash with red color if proper procedures are not
followed.
Operate Transmitter by pressing each pushbutton.
After operation, perform the following procedures in sequence:
(1) Press EMS mushroom
(2) Turn rotary key switch counter-
clockwise to the “OFF” position
(3) Remove key and keep it in a safe place
(4) Switch main power off to the equipment (Crane)
(5) Remove batteries if not used for a long period of time
Note:
Transmitter has power indicating functions with LED display.
← “Green Color” –
The LED will flash green when battery power is sufficient.
→ “Red Color” –
The LED will flash red when the power is low.
The operating distance will become shorter and intermittent when
the batteries are low.
Replace with new batteries when battery power is low.
! DO NOT USE RECHARGEABLE BATTERIES !
