●
Make sure you and your SmartKey are no further than 5m (15 ft) from your INMOTION SCV.
●
Verify that the SmartKey and your INMOTION SCV are linked.
●
Check the SmartKey to make sure the INMOTION SCV is not locked.
●
If the INMOTION SCV can still not power on, remove the Battery Pack and then reinsert it.
7.3. The INMOTION SCV Cannot Enter Balance Mode
Recommended Action:
●
Confirm the INMOTION SCV is powered on.
●
Make sure the Turning Shaft is centered and the Footboard Mat is level.
●
Confirm there is no weight on the Footboard Mat.
●
Tap the left side of the Footboard Mat with your foot without stepping on, then tap the right side with your other
foot.
●
If the INMOTION SCV still cannot enter Balance Mode, check to see if there is an error icon on your SmartKey.
●
If the INMOTION SCV still cannot power on, remove the Battery Pack and then reinsert it.
7.4. The INMOTION SCV Is Shaking
Recommended Action:
●
Check the joints between the Handlebar and the Turning Shaft. If they are loose, tighten them.
●
Check the joints between the Handlebar and the Quick Release Lock. If they are loose, tighten them.
●
Check the joints between the Tires and the Wheels. If they are loose, tighten them.
7.5. The Turning Shaft Slips or Is Off-Centered
Recommended Action:
129
Summary of Contents for SCV R1EX
