INMOVEMENT DYNAMIC DESK, Operation Manual

5

1  IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using the Dynamic Desk.

DANGER: 

To reduce the risk of electrical shock, always unplug InMovement product before 

cleaning or attempting any maintenance activity.

ƒ

WARNING:

To reduce the risk of burns, fi re, electric shock, or injury, it is imperative to 

connect each product to a properly grounded electrical outlet. See 

Grounding Instructions

.

ƒ

WARNING:

 Over exercising may result in serious injury or death. If you feel faint, stop ex-

ercising immediately.

ƒ

WARNING:

The ASTM International (ASTM ) F2115 - 05 Standard recommends the mini-

mum dimensions to be 1.64 ft. (0.5 m) on each side of the treadmill and 3.28 ft. (1 m) behind the rearward most 
portion of the usable moving surface. 

ƒ

WARNING:

Be sure the emergency stop lanyard is clipped to the user and in proper po-

sition on the Dynamic Desk before beginning any session.

ƒ

WARNING:

The belt centering adjustment must be performed if the belt is not between 

the marks indicating the maximum allowed lateral positions. Refer to Section 4.

ƒ

WARNING: 

The Dynamic Desk has immobilization lockout software. Activate the soft-

ware lockout when the Dynamic Desk is not in use. Refer to 

Immobilizing the Dynamic Desk

 in Section 4 for 

information on how to immoblilze the Dynamic Desk. Keep the instructions out of the reach of children.

ƒ

CAUTION

: 

Risk of injury to persons – to avoid injury, use extreme caution when stepping 

onto or off of a moving belt. Read instruction manual before using.

ƒ

CAUTION:

Any changes or modifi cations to this equipment could void the product war-

ranty.

ƒ

To disconnect, turn power OFF at the ON/OFF switch, then remove plug from electrical outlet.

ƒ

The product should never be left unattended when plugged in. Disconnect from the electrical outlet when not 
in use, and before putting on or taking off parts. To disconnect, turn power OFF on the ON/OFF switch, then 
remove plug from electrical outlet. 

ƒ

Never operate an InMovement product if it has a damaged power cord or electrical plug, or if it has been 
dropped, damaged, or even partially immersed in water. Contact InMovement Customer Support Services.

ƒ

Position the product so that the power cord plug to the wall is accessible to the user. Make sure that the power 
cord is not knotted or twisted and that it is not trapped under any equipment or other objects.

ƒ

If the electrical supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, 
or a similarly qualifi ed person to avoid a hazard.