User Manual
7
2 Hardware Installation
Step 1
Connect the ADSL port of the device and the Modem port of the splitter
through a telephone cable. Connect the phone to the Phone port of the
splitter through a cable. Connect the incoming line to the Line port of
the splitter.
The splitter has three ports.
=
Line: Connect to a wall phone jack (RJ-11 jack)
=
Modem: Connect to the line port of the device
=
Phone: Connect to a telephone set.
Step 2
Connect the Ethernet port of the device to the network card of the PC
through an Ethernet line (MDI/MDIX).
Note
: Use twisted-pair cables to connect the Hub or Switch.
Step 3
Plug one end of the power adapter to the wall outlet and connect the
other end of it to the Power port of the device.
Figure 3 displays the application diagram for the connection of the device, PC,
splitter, and the telephone sets when no telephone set is placed before the
splitter.
Figure 3 Connection diagram (without connecting telephone sets before the splitter)
Figure 4 displays the application diagram for the connection of the device, PC,
splitter and the telephone sets when a telephone set is placed before the
splitter.
