background image

 

 

Safety Precautions 

 

The following requirements should be fulfilled in order to ensure optimal performance of the 
device up-to- date technology without any danger of damaging the equipment or the users: 

  Please  read  the  installation  instructions in  the  User  Manual  thoroughly  before  you 

set  up  the  unit. 

  Correct handling ensures the safety of the user and the equipment. 

  The  device  is  designed  for  indoor  use.  The  unit  should  be  used  in  a  sheltered 

area,  within  a temperature range from +5 to +40 Celsius. 

  Do not expose the unit to direct sunlight or other heat sources.  The housing and 

electronic components may be damaged by direct sunlight or heat sources. 

  Avoid using the device in dusty or damp places and places where there is a risk of 

explosion. 

  Do not expose the device to humidity (in a bathroom for example). 

  When  the  device  is  placed  close  to  devices  emitting  electromagnetic 

interferences  such  as  a microwave oven, HiFi equipment, etc., its performance is 
degraded. Move the device outside the disturbance range and the modem resumes 
its normal operation. 

  Do not try to open or repair the unit yourself. The unit is a complicated electronic 

device that may be repaired only by authorized and qualified personnel. 

  Only  use  the  power  adapter  that  comes  with  the  package.  Using  a  different 

voltage  rating  power adapter may damage this unit. 

  Place this unit on a stable surface or mount it on the wall. 

  Disconnect the power adapter before moving the unit. 

  Do not put the cables where people can fall over them. 

  Keep the package out of reach of children. 

 

 

Summary of Contents for G31












Reviews: