Chair Manual
7
Chair Installation
1. Removing the chair and parts from the package
Lift Carton Upwards
Lift Carton Upwards
a. Lift and remove main outer carton.
b. Remove cardboard and foam on both sides of the massage chair.
c. Remove accessory box (includes: instructions, power cord etc.).
2. Finding a location for the chair
3. Moving the massage chair
Allow sufficient space around the chair
for recline purposes. (6in distance for the
back side and 20in in front of
the footrest.)
* To avoid damage to the floor and reduce
the noise, put an area rug under the
massage chair.
* Please do not put it on wet or
uneven floor.
* To avoid signal interference, please place it 4
feet away from AV, TV, and radio.
Push backrest downwards to tilt the chair at
a 45’ angle. Slowly maneuver the chair to a
desired location. Lower the chair slowly and
smoothly until it is fully flat on the ground.
* Do not move massage chair when in use.
* Moving the massage chair may cause damage to
floors. Floor protection is recommended
(e.g. rugs, carpet).
* Do not drop or suddenly let go of the chair when
moving as it may damage the chair.
* It is recommended to work with at least
two people.
6in
20in
