![background image](http://html1.mh-extra.com/html/inno/if44/if44_installation-instructions-manual_2062284011.webp)
Daily Maintenance / Storage
8
−11−
If the rod box becomes dirty, wash it with water.
2
Check that the three levers are securely
closed, and the keys are locked.
3
Checking before driving
7
Shake the rod box in all directions, right and
left, backward and forward, and up and down,
to look for any rattling caused by improper
installation. If you still hear or feel rattling, go
back to Section 4 "Installation of the Rod
Box" on page 7, and repeat the tightening
procedures to re-tighten the two installation
positions.
Make sure that the memory mount hooks are
symmetrically positioned. If the center
between hooks matches the base rack
center, they are correctly positioned.
1
Lever
To avoid deterioration of the Rod Box material, do not use detergent, wax or thinner.
Do not oil the lock and the hinge portions.
If you do not plan to use the rod box for a long period of time, remove the rod box from the vehicle roof, inspect every
part of it, and store it away from direct sunlight.
The rod box materials gradually deteriorate due to exposure to UV light. If you do not plan to use the rod box for a long
period of time, store it away from direct sunlight, high temperature, and high humidity.
Watertight molds on Cover A and C are subject to wear and tear. If you notice they have allowed a lot of water inside
the rod box, replace them with new ones.
Warning
Note
Note