53
INNOCIGS EGRIP 2 LIGHT – CHANGING & OPERATING OF MODES
Explanation of the TCR and VT modes (TEMP)
1. Locking and unlocking the coil resistance in VT mode
Note
In VT mode, you can regulate the temperature of the coil between 100°C and 315°C or 200°F and 600°F. Press the “up“ button to
raise the temperature or the “down“ button to reduce it. Each key press changes the temperature by 5°C or 10°F. Press and hold the
“up“ or “down“ buttons to quickly and continuously change the temperature.
Press the fire button three times to enter the menu. Press the down button twice so the second line displaying the resistance flashes
on the display. Press the „up“ button to lock or unlock the resistance of the atomizer. When the „lock“ symbol is shown on the
display, the resistance is locked.
a) Only lock the resistance when the coil is at room temperature. This will ensure that the correct “base resistance“ of the atomizer
coil is locked. The temperature control will remain correct, as long as the coil is not replaced. If the resistance is locked, you can
remove the top cap regardless of whether the atomizer coil is hot or cold.