21
20
The main CoolFire ACE ba�ery LED power light will blink from red to yellow to
green, a�er which the CoolFire ACE ba�ery will enter standby mode. The final LED
color will indicate the current power level.
The main LED light will display green to indicate a full ba�ery charge, yellow indicates
power is at half capacity and red indicates immediate charging is required.
Red
LED light = ba�ery voltage is lower than 3.6V
Yellow
LED light = ba�ery voltage is around 3.6V-3.74V
Green
LED light = ba�ery voltage is higher than 3.75V
The Red LED will blink for eight seconds when ba�ery capacity is lower than 3.3V
and the CoolFire ACE will automa�cally power off.
When the CoolFire ACE ba�ery is fully charged the LED will power on and the
device will go off.
IMPORTANT Charging Informa�on:
Only charge Innokin devices with a high quality CE/UL Cer�fied 5V/1A wall charger.
• Never charge a ba�ery that has been damaged or dropped.
• Never plug a charger into a non-approved mains power transformer.
•
Do not overcharge. Remove the ba�ery from the charger when charging is complete.
• Never leave a charging ba�ery una�ended.
• Only use the included high quality charging cable.
• Wall Adapters should be CE / UL / FCC cer�fied, high quality and authen�c.
• Do not charge your vaporizer with your car.
•
If traveling by airplane, do not pack your device into your check in baggage.
Speak with your airline about e cigare�e/vaporizer transport guidelines.
•
If there are any issues with the device please contact your Authorized Innokin
vendor immediately.
0.50Ω
0.0W
4.00V
