OPERATION GUIDE:
13
12
The CoolFire ACE has three bu�ons: “ ” bu�on, "+" bu�on and "-" bu�on.
“ ” bu�on: Power
“+” bu�on: CoolFire ACE / VW+
“-” bu�on: CoolFire ACE / VW-
All CoolFire ACE se�ngs can be easily changed without the use of a menu system.
The large OLED screen readily displays all important informa�on.
Remembers last Voltage or Wa�age se�ng:
When the CoolFire ACE is turned off it will remember the current voltage or
wa�age se�ng and it will retain the se�ng when the CoolFire ACE is powered
back on.
High compa�bility 510 connector:
The CoolFire ACE threading is compa�ble with all standard 510 clearomizers &
atomizers including the iClear30, iClear30B, iClear30S, Gladius-X, and the iSub Tanks.
Check Atomizer:
When the atomizer is not connec�ng properly , or resistance more than 9.9 Ohm ,
the screen will display
" CHECK ATOMIZER ".
The CoolFire ACE features automa�c real-�me ba�ery voltage detec�on.
Overheat Protec�on:
The screen will display " TOO HOT " if the PCB is overheated.
The CoolFire ACE features automa�c real-�me PCB Chipset temperature detec�on.
Over-Discharge Protec�on:
The CoolFire ACE Advanced Personal Vaporizer monitors the ba�ery voltage and will
automa�cally power off when the ba�ery over discharged.
‘Vape while charging’ Technology
The CoolFire ACE is recharged with a Micro USB cable. When plugged into a power
source the CoolFire ACE can also be vaped and charged at the same �me with Innokin
Technology’s ‘Vape while you charge’ pass-through technology.
0.50102
4.20V
100