enter standby mode. The final color of the LED will indicate the current power level.
When the Lily Electronic Cigarette has been powered on, hold the button down to activate the unit.
Low Voltage Warning
The Red LED will keep blinking for eight seconds when battery capacity is lower than 3.3V and the Lily
Electronic Cigarette will automatically power off.
Battery Capacity Display
The main LED light will display green to indicate full battery charge, yellow to indicate half capacity and
red to indicate immediate charging is required.
OPERATION GUIDE
SAFETY:
10 second cutoff:
If the activation button is held for 10 seconds or longer, the Lily Electronic Cigarette will stop firing until
the button is released and pressed again.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the Lily Electronic Cigarette against shorted atomizers, and
will stop the unit from functioning in unsafe conditions.
Over-Discharge Protection:
The Lily Electronic Cigarette monitors the battery voltage and will automatically power off when the
battery is discharged.
To POWER ON the Lily:
Pressing the power button “ ” three times in rapid succession will power on the Lily Electronic
Cigarette. The main LED light will blink from red to yellow to green, after which the Lily Electronic
7
6