InnoMedia 6328 Quick Reference Guide
9
Copyright © 2016 InnoMedia. All rights reserved.
System Up Time:00 hours, 00 minutes, 51 seconds ago
4.
Ping from CLI
From the CLI you can ping to see if your network connection is up and able to get to a remote IP. You
can ping by Domain or IP.
ping www.google.com
<Cr>
or
ping 74.125.224.52
<Cr>
5.
Enable and Disable Debug Information
To capture debug information.
Command sequence:
D1
<Cr>
(to enable debug)
Tl
<Cr>
(l is lower case L)
D1
Debugging is enabled.
Tl – (L lower Case L)
Please enter the level you want to trace: 50
Traces less than or equal to trace level 50 will be printed out.
D0
<Cr>
(D Zero, to disable debug)
Note: Tl level 50 for signaling; 80 for signaling and dsp; 101 for provisioning
3.3
Enable Debug Trace to be sent to Syslog Server
Command:
Mq
<Cr>
Enter the syslog server IP address.
Note that if there is no syslog server configured, the MTA display the messages to the console screen.
3.4
Reboot the MTA system
Command:
R
