mGuard
smart²/smart
114
Innominate Security Technologies
I15007_en_02
6.5
Configuration in Stealth mode
On initial startup, the mGuard can be accessed via two addresses:
–
https://192.168.1.1/ (see Page
115)
–
https://1.1.1.1/ (see Page
115)
Alternatively, an IP address can be assigned via BootP (see “Assigning the IP address via
BootP” on page
116).
The mGuard can be accessed via https://192.168.1.1/ if the external network interface is not
connected on startup.
Computers can access the mGuard via https://1.1.1.1/ if they are directly or indirectly con-
nected to the LAN port of the mGuard. For this purpose, the mGuard with LAN port and
WAN port must be integrated in an operational network in which the default gateway can be
accessed via the WAN port.
–
After access via IP address 192.168.1.1 and successful login, IP address
192.168.1.1 is set as a fixed management
IP
address.
–
After access via IP address 1.1.1.1 or after IP address assignment via BootP, the
product can no longer be accessed via IP address 192.168.1.1.
Summary of Contents for mGuard
