background image

INSTRUCTIONS IN ENGLISH  

|

  

GOTOW DRILL-POWERED TOW BAR

Drill Requirements:

18v or greater cordless drill with 1/2in (13mm) chuck capacity 
(drill not included with purchase)

Typical Tow Speed: 

12ft/min(4m/min) with drill on LOW
42ft/min(13m/min) with drill on HIGH

Max User Weight:

270 lb (123 kg)

Max Recommended 
Airplane Weight:

3600 lb (1636 kg)

Weight:

30 lb (13.6 kg)

Size:

39in H x 17in W x 69in L (99cm H x 44cm W x 176cm L)

Shipping Specs:

size: 8in H x 17in W x 49in L (21cm H x 43cm W x1245cm L)
weight: 38 lb (17.3 kg) 

SPECIFICATIONS:

With included Lug 
Tubes:

Cirrus SR20, SR22
Cessna 150, 152, 162, 172, 175, 177, 182, 185, 205, 206, 207
Beechcraft Queen Air, Musketeer, Sport, Sierra, Sundowner, Twin
Vans RV6A, RV7A, RV8A, RV9A, RV10
Piper Tomahawk

With optional Adapter 
Set (GoTow Adapter Set 
Item #36550):

Cessna 172RG, 177RG, 182RG, 210 Series
Beechcraft Bonanza, Debonair, Duchess, Barron, Duke, Skipper 
Lanceair 400, Columbia 400, Cessna TTX
General Nose Wheels with approximately 0.840in ID or 1.125in ID 
(Saratoga, for example)

COMPATIBLE AIRPLANES:

GoTow Drill-Powered Tow Bar Item #36520

2

Summary of Contents for GoTow 36520













Reviews: