Page 2 of 2
Edition 12/09/2013
BEF 401-10
COUNTER PLATE STABIL-10 / STA-10
INNO
TECH
FASTENING SET
BEF 401-10 COUNTER PLATE
SUBSTRATE: e.g.: STEEL GIRDERS
= Fastening set 401-10 for INNOTECH STABIL 10 (STA 10)
Fasten with
4 x M12 threaded rods:
The counter plate has the same dimensions as the
base plate of the post:
Start by screwing 2 hex nuts each onto the 4
threaded rods before countering them against each
other at the end of the threaded rod.
Use the counter plate to fasten the post as shown
in the figure on the right. Make sure that all 4
corner bores are fitted with washers and the post is
evenly aligned on the steel girder.
DEVELOPMENT
INNO
TECH
Arbeitsschutz GmbH
A-4656 Kirchham, Laizing 10
w w w . i n n o t e c h – s a f e t y . e u
max. 105
