13
LIFELINE KIT / 180212 / www.innotech.at
12
INSTALLATION SUBSTRUCTURE
The basic requirement for professional/proper installation is a statically load-bearing
installation substructure
and the use of the original fasteners listed in the relevant
instruction manual.
DANGER TO LIFE as a result of installation on an unsuitable
installation substructure.
-
Install INNOTECH "LIFELINE-KIT" anchorage points in a statically
load-bearing installation substructure (e.g. solid concrete with a
minimum concrete quality of C20/25).
-
DO NOT install on screed, levelling concrete, blinding
concrete etc.
-
In cases of doubt, have the installation substructure examined by a
structural engineer or by the manufacturer.
!
DANGER
INNOTECH "LIFELINE-KIT" can be installed on façades, flat roofs, and
sloping roofs.
13
INSTALLATION TOOL
[mm]
Spanner size = 19
2x
Spanner size = 5
EN