InnoTune elektrotechnik
Tel.:
(+43) 676 9626882
Sparkasse Rainbach
Severin Elmecker
E-Mail:
IBAN AT522032016100001244
Summerau Anger 3
BIC ASPKAT2LXXX
A-4261 Rainbach i.M.
Web:
www.innotune.at
UID ATU68743899
2.3
Assembly
Notice
The following drilling plan is not on a 1: 1 scale. It must not be used as a drilling template
be used. Please only take the specified dimensions from the drilling plan.
Requirements
Recommended mounting height measured 1.00 m -1.20 m from the ground to the lower
hole. After installation, the wallbox must be able to carry at least 16 kg.
Assembly steps
1. Mark the two mounting holes according to the drilling plan.
2. Drill the mounting holes according to the mounting surface (e.g. dowels for masonry).
The screw diameter may not exceed 6 mm.
3. Screw in the upper fastening screw.
Notice
The fastening screws are due to possible different mounting surfaces
to choose accordingly. Please do not necessarily use the screws provided in the scope of
delivery.
