InnoTune elektrotechnik
Tel.:
(+43) 676 9626882
Sparkasse Rainbach
Severin Elmecker
E-Mail:
IBAN AT522032016100001244
Summerau Anger 3
BIC ASPKAT2LXXX
A-4261 Rainbach i.M.
Web:
www.innotune.at
UID ATU68743899
2.4
Electrical connection
The wallbox and the electrical connection were designed in such a way that they can also
be carried out by laypeople. A 16A or 32A CEE coupling is optionally installed on the
supply line.
Notice
Before the charging process, make sure that the socket, cabling, cross-section and fuse
protection of the CEE socket provided by the customer can also be used in continuous
load operation. We ask for instructions from a licensed electrical company for the
assessment. In the event of damage caused by a missing or incorrect assessment,
InnoTune Elektrotechnik disclaims liability.
2.5
Approval by your RU
We would like to point out that this product is subject to an obligation to notify the
responsible EVU (energy supply company) regardless of the connected load.
2.6
Setting the charging current
The charging current is set at the factory to the maximum charging power of the
prefabricated CEE plug. A distinction is made between 16A / 11kW and 32A / 22kW. If
necessary, the maximum charging current can also be readjusted in intermediate steps.
The charging current must never be set higher than the line fuse itself. The rotary switch
(Fig. 2.7 / 1) is used to set the charging current from 6 to 32 A (see table Fig. 2.7).
Notice
The charging current may only be changed by trained specialist personnel. Make sure
that the wallbox is de-energized before changing the rotary switch.
