Innova S.r.l.
Pag. 10
N420227A_ManualeHRC_ Rev06.EN.docx
Wait until the cement mortar or polyurethane foam
grip.
Place the rack inside-out by compressing the
springs on the larger diameter tube towards the
final part of the core outwards.
Release and check the fixing of the grid.
-Input the heat exchanger from the inside to the
final part of the tube with smaller diameter.
Figure 4 Positioning: Outdoor Grill
Fig.5 Inserting exchanger
Detach the cover from the motor support by
pressing on the lateral holes (1) with a small
screwdriver (fig.6).
Fig.6 release front cover
Fracture the tax provided for the connections
passage (2), in the case of external connections
not under trace fracturing the planned areas (3)
both on the motor support that on the cover
(fig.7).
Fig.7 Inserting cables
