Innova S.r.l.
Pag. 16
N420227A_ManualeHRC_ Rev06.EN.docx
3
Once the slave is coupled the OUT extraction
led (left led) and led IN single input central)
will blink alternating with the LED IN / OUT
of the automatic cycle (right)
Max 5 cm.
↕
Selecting Slave mode
Now it will be possible to select the operating mode
of the unit compared to the master unit in operation
injection / extraction cycle.
-If you want the units' operation recovery
rotate opposite to the master press the OUT button
extraction
as in column A, until the fan starts to
rotate.
The LEDs will flash at this point alternatively
as indicated in column A.
If instead you want the slave units to rotate parallel
to the master press the Enter button IN
as in column B, until the fan starts to rotate.
The LED will blink at this point as indicated
in Column B.
Max 5 cm.
↕
Max 5 cm.
↕
Column A
Column B
Selecting parallel operation to the master
