Innova S.r.l.
Pag. 22
N420227A_ManualeHRC_ Rev06.EN.docx
UNLOCK
/
REMOTE
REENABLING
1
After three minutes of non-use remote control
to save energy enters lock mode /
Sleep.
2
Press the Info button for at least 2 seconds to
reactivate and unlock the remote control.
3The
remote control and ready to commands.
READY
Unlocking by remote control standby
ON
OFF
UNIT
'/
SELECTION
RULES'
AND
SPEED
'
1
To activate the unit / system from off;
2
first select the desired mode between
extracting, placing and cycle;
3
now select the fan speed
between min - med - max
EXAMPLE :
In this picture, and 'selected mode
automatic cycle and the speed 'media.
With regard to the single extraction or single
function
input, the unit returns after 30mins alone in
modlaità cycle.
-To turn off the system, press the ON-OFF button.
unit Activation
System Shutdown
REQUEST
STATE
SYSTEM
1
With active remote control and 'can query
the system to understand the status and active
functions.
Press the info button and wait for the remote
control
illuminate the LEDs relative to the states:
The remote control will display after a few seconds
and for a few seconds:
-How 'set
-Speed set
-Functions sensors and night if active
