Innova S.r.l.
Pag. 5
N420227A_ManualeHRC_ Rev06.EN.docx
DANGER
It warns that failure to observe the precaution may cause risk of injury to exposed
persons.
WARNING
It warns that failure to observe the precaution may cause damage to the unit or system.
1.4
WARNINGS
The installation of the unit must be performed by personnel qualified according to the regulations in the various countries.
If the installation is not performed could become a dangerous situation
Avoid installing the unit in wet rooms or in the presence of large amounts of heat.
On the electrical side to prevent any risk of electrocution, it is essential to disconnect the main switch before making
electrical connections and any maintenance operation.
After connecting the cables, ensure that the cables are placed so as not to exert excessive forces on the shell or on
electrical panels; any incomplete link of the covers may cause overheating of the terminals.
Installations carried out outside of the warnings of this manual or use outside of the operating limits will void
Instantly the warranty.
Make sure that the installation and initial operation is carried out by authorized personnel
1.5
COMPLIANCE
'
L 'unit is compliant with the following standards:
- 2014/35 / EC Low Voltage Directive
- 2006 / 42CE Machinery Directive
- 2014/30 / EC Electromagnetic Compatibility Directive
1.6
IDENTIFICATION
-The unit is identifiable through the plate located inside the lid of the same. The same plate and 'shown on the right as a guide.
-Sull 'package will be an additional nameplate with dell' drive model and shipping references.
The plaque on 'Packaging has no significance for the traceability of the product in the years following the sale.
The excision, the deterioration and the illegibility of the nameplate on the unit, involves great problems in the identification of the
machine, in the availability of spare parts, and then in all its future maintenance.
