Innova S.r.l.
Pag. 12
N420229A_ManualHRW_rev2.en.docx
2.1.2
POSITIONING UNIT '
Ceiling mount
For ceiling mounting unit, you must:
Position 4 threaded rods inside the stirrups arranged on
the 4 corners of the unit;
Attach to the ceiling unit, via the brackets, using
appropriate anchoring systems (anchors, chains ...) and
check the leveling with the aid of a spirit level.
Ensuring sufficient space for the performance of
maintenance tasks: it must be guaranteed the opening of
the cover of the unit (from the bottom).
Not mount the unit with the hips in direct contact with
the walls to avoid possible noises from contact, insert
strips of rubber or neoprene in this case.
Ceiling mount
Floor mounting
For mounting unit on the ground is needed:
Position 4 threaded rods inside the stirrups arranged
on the 4 corners of the unit;
Fix the unit to the floor through the brackets, using
appropriate anchoring systems (anchors, chains ...)
and check the leveling with the aid of a spirit level.
Ensuring sufficient space for the performance of
maintenance tasks: it must be guaranteed the opening
of the cover of the unit (from the bottom).
Not mount the unit with the hips in direct contact with
the walls to avoid possible noises from contact, insert,
or neoprene rubber strips in such a case.
Floor mounting
