background image

Heavy Duty Deluxe Inversion Table

Model ITM5900

Owner’s Manual                     

Version:200822JJ

WARNING:

BE SURE to read this manual in its ENTIRETY prior 
to installing and using the inversion table.

DO NOT USE inversion table without the approval 
of a licensed physician. Some medical conditions 
may not be suitable for use with this product.

CAREFULLY READ all Warnings and Instructions 
before using this inversion table. Misuse of this 
equipment may result in serious injury.

BODY WEIGHT will put pressure on ankles while 
inverting. New users are advised to start at lower 
setting (15 or 30) and to wear athletic shoes.

DO NOT let children under the age of 13 use the 
inversion table. 

DO NOT allow children, bystanders, or pets around 
while using this equipment.

DO NOT put hand or fingers inside the Protective 
Cover for the Angle Selector Pin.

TO PREVENT unauthorized usage, it is strongly 
recommended you purchase a lock to fasten the 
Height Adjustment Tube to the Cross Bar.

KEEP FINGERS, feet, clothing, and hair free of all 
moving parts.

ALWAYS use all basic safety precautions when 
using any electrical products.

TIGHTEN ALL nuts, bolts, and screws BEFORE 
using equipment. 

LEAVE adequate space to invert.

This equipment is for indoor, household and      
non-institutional use only.

Questions/Comments

Innova Products Inc. is committed to providing the best quality and customer satisfaction 
for all products we distribute. If you are dissatisfied with your purchase or need assistance, 
please do not hesitate to contact us.

Phone: (408) 541-1866         

Monday through Friday                        

8:00 am 

– 4:00 pm Pacific Time

Email: support@innovaproductsinc.com

Note: 

This product is 

designed to adjust from 4’10” 

to 6’6” with a 

Maximum User 

Weight of  

300 LBS

Images may be slightly different 
from actual product.

Summary of Contents for ITM5900





















Reviews: