NOTE:
Before removing the compressor/gas liquid separator, make sure there is no refrigerant in the pipeline and power is cut off.
Removal of compressor/gas liquid separator
Step
Picture
Work instruction
2. Break off the pipes that
connecting to the
compressor/gas liquid
separator.
Weld the pipes that are
connected to the
compressor/gas liquid
separator.
Then remove the pipes.
NOTE
: When welding the
pipes, do not let the flame
burn the other
components.
3.
Loosen the compressor’s
base connectors / gas
liquid separator’s base
nuts.
Screws
Use a wrench to twist off
the compressor/gas liquid
separator’s base nuts.
4. Remove the
compressor/gas liquid
separator from the chassis.
Take away the
compressor/gas liquid
separator and replace with
a new one.
NOTE
: When replacing
the compressor/gas liquid
separator, avoid touching
the nearby pipeline and
components.
74
SERVICE MANUAL
Summary of Contents for Inverter FLEX24 DEV24H2R18
Page 9: ...6 SERVICE MANUAL 2 Control 2 1 Operation Mode 2 1 1 Cooling Mode ...
Page 10: ...2 1 2 Heating Mode SERVICE MANUAL 7 ...
Page 19: ...Model DEV48H2R18 DEV60H2R18 16 SERVICE MANUAL ...
Page 27: ...SEV2040H2R18 SEV4060H2R18 24 SERVICE MANUAL ...