SERVICE MANUAL
75
Removal of compressor/gas liquid separator
NOTE:
Before removing the compressor/gas liquid separator, make sure there is no refrigerant in the pipeline and power is cut off.
Step
Picture
Work instruction
5. Install the new
compressor/gas liquid
separator onto the chassis.
Screws
After replacing the
compressor/gas liquid
separator, tighten up the
base screw nuts.
6. Connect the welding
interfaces of
compressor/gas liquid
separator to the pipeline.
Weld the connection pipes
of compressor so as to
connect them to the
compressor.
NOTE
: When replacing
the compressor, avoid
touching the nearby
pipeline and components.
7. Connect the compressor
wires.
Connect the compressor
wires to the wire terminals
on the top of compressor.
NOTE
: When connecting
the wires, be sure to
match the colors with the
corresponding wire
terminals.
Summary of Contents for Inverter FLEX24 DEV24H2R18
Page 9: ...6 SERVICE MANUAL 2 Control 2 1 Operation Mode 2 1 1 Cooling Mode ...
Page 10: ...2 1 2 Heating Mode SERVICE MANUAL 7 ...
Page 19: ...Model DEV48H2R18 DEV60H2R18 16 SERVICE MANUAL ...
Page 27: ...SEV2040H2R18 SEV4060H2R18 24 SERVICE MANUAL ...