SAFETY PRECAUTIONS
• Read the following SAFETY PRECAUTIONS carefully before installation.
• Installation must be performed in accordance with the requirement of NEC and CEC by
authorized personnel only.
• Incorrect installation due to ignoring of the instruction will cause harm or damage, and the
seriousness is classifie d by the following indications.
/'" &
WARNING
This symbol indicates the possibility of death or serious injury.
&
CAUTION
This symbol indicates the possibility of injury or damage to property.
The items to be followed are classified by the symbols:
Symbol will background white denotes item that is PROHIBITED from doing.
f
&
WARNING
1)
Engage dealer or specialist for installation. If installation done by the user is defective, it will cause water
leakage, electrical shock or fire.
2)
Install strictly according to installation instructions. If installation is defective, it will cause water
leakaqe, electrical shock or fire.
3) Use only included accessories in this package for installation.
4) Install at a strong and firm location which is able to withstand the set·s weight. If the strength is not enough
or installation is not properly done, the set will drop and cause injury.
'
5)
For electrical work, follow the local national wiring standard, regulation and these installation instructions. An
independent circuit and single outlet must be used. If electrical circuit capacity is not enough or defect found
in electrical work, it will cause electrical shock fire.
6) Use the specified cable and connect tightly and clamp the cable so that no external force will be acted on
the terminal. If connection or fixing is not perfect, it will cause heat-up or fire at the connection.
7)
Wiring routing must be properly arranged so that control board cover is fixed properly. If control board cover
is not fixed perfectly, it will cause heat-up at connection point of terminal, fire or electrical shock.
8)
When carrying out piping connection, take care not to let air substances other than the specified
(S)
refrigerant go into refrigeration cycle. Otherwise, it will cause lower capacity, abnormal high pressure
in the refrigeration cycle, explosion and injury.
9)
Do not modify the length of the power supply cord or use of extension cord, and do not share the
(S)
single outlet with other electrical appliances. Otherwise, it will cause fire or electrical shock.
&
CAUTION
1)
This equipment must be grounded and installed with leakage current breaker. It may cause electrical
shock if grounding is not perfect.
2) Do not install the unit at place where leakage of flammable gas may occur. In case gas leaks and
(S)
accumulates at surrounding of the unit, it may cause fire.
3)
Carry out drainage piping as mentioned in installation instructions. If drainage is not perfect, water
may enter the room and damage the furniture.
©2015 Innovair Corporation. All Rights Reserved.
www.innovair.com
