VoIP gateway IP400 version 5.01
Page 19
If you want to configure further gateways in the same way, you have to delete
the assignment of the IP address to the hardware address first before connecting
the next device to your PC.
With Windows and Unix systems, this is done using the
arp
command:
C> arp –d 192.168.0.1
You can now configure the gateway to suit your own particular requirements. This
procedure is described in section 3 “General information on configuration” from
page 20.
Tip
This is necessary, as the new device has to respond to the same IP address,
despite having a different hardware address.