Page 20
VoIP gateway IP400 version 5.01
3
General information on configuration
Please note, that your browser has to support HTML 4.0, HTTP 1.1 and Java
applets. The configuration applet has been tested with Microsoft's Internet
Explorer 6.x. Certain functions, such as sorting lists, require the XML and XML
stylesheet functions. However, the devices can be fully operated, even without
these functions.
To configure the equipment, go through the following steps:
• Configure the ISDN- or analogue interfaces.
Here, you define the type of connection on the gateway's ISDN or analogue
interface.
• Define other VoIP gateways and VoIP terminal equipment.
Here, you tell the gateway which other innovaphone gateways, 3rd party
VoIP gateways and VoIP terminal equipment or PC programmes you want to
use.
• If necessary, configure the WAN interfaces.
Here, you specify the parameters for your Internet or intranet access, if you
also intend to use the gateway as an ISDN or a VPN router.
Tip
Configuration is possible using a
Web Browser
. In this manual, we describe
the procedure using the
Web Browser
, which is usually the most convenient
one, for common application scenarios.
Note
If access to the gateway is protected by a firewall, then the services
tcp/80
(http) need to be enabled. Please note, that this only enables configuration
access. Please refer to section “NAT and firewalls” from page 143 if calls
through the firewall are required.
Tip
The innovaphone VoIP gateway IP 400 can also be used as ISDN router and
as VPN router (PPPoE).