VoIP gateway IP400 version 5.01
Page 21
• Configure the call routing.
Here you specify which terminal equipment is to be reached, under which
number.
The configuration of the optional innovaphone PBX components is described in a
separate manual, supplied together with your innovaphone PBX licence.
First, launch your
Web Browser
and enter the URL
http://
address
/, where
address
is the IP address of the gateway to be con-
figured. It is entered in the format
x
.
x
.
x
.
x
. If you have entered a host name for
the gateway in the DNS name directory, you can of course also use this name,
e.g.
http://h323gw.yourdomain.de
.
Now click on
Config
to start the configuration applet. You will be asked to enter
the correct user ID and the password set when commissioning the gateway.
3.1
General information on the configuration user
interface
The user interface, to configure the gateway, consists of two parts. The first part
consists purely of HTML pages and is mainly used for calling up run-time informa-
tion. These pages are used in the same way as any other web pages. The individ-
ual functions are described in more detail in section 9 “Administration via the Web
Browser user interface” from page 119.
The actual configuration is performed using a separate configuration applet – a
JAVA application. You start the applet by calling up
Config
from the administra-
tion user interface.
This applet runs in a separate window. This allows you to access the various
administration user interface functions, whilst configuring the gateway, without
having to close the configuration applet or open a second browser window.
The applet consists of two areas. On the left-hand side, the entire configuration
of the gateway is shown as a tree, in the same way as for a file browser. When
you click on objects in this tree, detailed information is displayed on the right-hand
side. The window on the left is used to navigate through the configuration. Entries
can only be made in the right-hand window.
There is a button bar at the top of the applet window. The
Save
,
Activate
,
Reset
,
Reset when idle
and
Cancel
buttons relate to the entire configuration.
Refer to section 3.2 “Checking and saving the configuration” from page 22 for the
description of these functions.
The other buttons (
Add
,
Remove,
etc.) relate to the object currently selected in