VoIP gateway IP400 version 5.01
Page 25
• To configure the Ethernet interface completely, it might be necessary to regis-
ter the standard gateway of your network as the
Default IP Router
.
• If more routes have to be added on the other side of the standard gateway,
this can be done via the
Add IP route
button.
For network routes, enter the
Network address
with the host part as 0, and
enter the correct
Network mask
.
For host routes enter the complete IP address of the host and enter
255.255.255.255
in the
Network mask
.
Fig. 4 Adding routes to the Ethernet interface
• If your gateway is not to also serve as a WAN router, leave the
DNS server
address
field empty and deactivate the
Do proxy-ARP
checkbox.
• The
Full duplex
checkbox is usually not activated.
• Check the 802.1p box, if the equipment's Ethernet packets need to be priori-
tised in the switch.
Tip
This option is only necessary with the IP 400. The IP 3000, IP 3000DD,
IP 800, IP 202 and the IP 21 negotiate the full duplex mode auto-
matically with the switch or hub.